Ever wondered how to tackle cleaning your area rugs? Here’s a how-to from the friendly folks at Acme Carpet and Upholstery Cleaning in Denver. Although, after you read through all this, you might start thinking it will be easier just to give us a call and have the professionals handle it!
Let’s dig in, and you can decide for yourself.
First of all, how do you know when it’s time for a deep cleaning? You’ll first start to see some stubborn stains, and you might even notice there’s a lot of dust and dirt trapped in the cracks. For big area rugs, how to tackle cleaning your area rugs may require a few pairs of hands to help. Most people don’t realize how heavy those rugs can be.
Pick a Spot Outside
Deep cleaning an area rug can get messy, so it’s best to pick a spot outside. Since it is winter right now, that may prove to be difficult. You might get lucky though, and find a beautiful day. If not, try to find a covered area where you can keep dry if it rains. An option might be to pull your car out of the garage and do it in there. That way it will be a little warmer too.
Before heading outside with your area rug, be sure to give it a good vacuuming. Use slow strokes and be very thorough. Once you’re happy with the top, flip it over and vacuum the back side too. This will help to clean out any lingering dust. Then roll it up and get your helpers to help you haul it outside. If your outside station is in the garage, don’t take it in there just yet. The first step outdoors can get pretty messy.
Have you ever heard how they used to clean rugs before vacuums? They would hang them up and beat them with a broom or something similar to knock the dust out. Give it a try and see how much dirt comes billowing out of your “thoroughly vacuumed” rug.
Test the Shampoo
Even though carpet shampoos are supposed to be safe for cleaning area rugs, there can still be reactions. Be sure to buy a type that is made especially for your carpet material. We also don’t recommend trying to make your own shampoo. Different carpets and fibers react differently to various chemicals. You don’t want to destroy your beautiful area rug because the shampoo was incompatible.
Even if you buy the right type, double-check it, and test an inconspicuous spot first. Apply a bit of shampoo with a little water and let it sit for several hours. Then, after rinsing off the spot, thoroughly examine the area to be sure there is no color fading or damage. If everything still looks the way it should, you’re good to go.
Shampoo the Carpet
This is the not so fun part of how to tackle cleaning your area rugs. Get out your garden hose to thoroughly soak down your rug. Using a sturdy brush, you’re going to have to get down on your hands and knees and scrub that carpet! This is the part that can be downright miserable this time of year. The water from your garden hose is going to be pretty chilly, and that means your fingers will be very unhappy. Not to mention you’ll probably end up pretty damp from the knees down since you’ll be crawling all over the rug while you scrub.
Take special note of any ugly stains. It’s probably going to take a fair amount of elbow grease, but you should be able to get at least most of it out.
Rinse the Carpet
Be sure to check the instructions on your shampoo as to how long you should leave it soaking on the carpet. You don’t want to go to all this effort and then not take full advantage of the shampoo’s rug cleaning abilities. Once you’ve waited the recommended time, rinse down the rug with a garden hose. Be thorough, you don’t want to leave behind any shampoo residue.
Dry the Rug
Drying an area rug, as you can imagine, takes a long time. Start by wringing out as much water as you can. You can try using a squeegee to get out even more water. Then you’ll need to hang it up somewhere out of the rain and snow so it can drip dry. You might be able to clear a spot in the garage or laundry room for this step. Be prepared for it to take a couple of days to dry out thoroughly. You’ll know it’s dry when you squeeze it, and it doesn’t even feel damp. Most rugs will be a bit stiff as well, which is another good indication.
Another good vacuum is not so much for cleaning as it is for perking up the fibers. All that scrubbing and rinsing and wringing flattens down most carpet materials and makes them look a bit sad. Vacuuming can help pull those fibers back up again, so your area rug looks fresh, clean and new!
We hope this information on how to tackle cleaning your area rugs has been helpful to you. As you can see, cleaning your area rugs is a pretty big task, and in the wintertime, it’s a pretty unpleasant one. Calling the professionals at Acme Carpet and Upholstery Cleaning to take care of this task for you sounds like a pretty good idea, doesn’t it?
Our staff is knowledgeable about how to tackle cleaning your area rugs, including using the right techniques to get your area rug looking, smelling and feeling as good as new! The best part is that you won’t have to freeze your fingers off to make it happen. Give us a call today. Our staff is happy to answer questions. Once you’ve set your appointment and we’ve completed cleaning your area rugs, we can guarantee that you’ll be coming back again.